- MCS Accredited Heat Pump
- Eligible for RHI and Green Home Grants
- Complete installation solution Pack (Heating, Cooling and DHW)
- Fully rated heating capacity guaranteed to -20ºC
- Can be combined with other energies (Solar, Gas, Oil) te
- Sizes: 8 Kw, 11Kw & 16Kw
DUAL CLIMA air source heat pumps are equipped with a DC Inverter compressor which is quiet, robust, high efficiency compressor that can modulate the thermal power according to the needs of the house.
Due to the power setting, the on/off cycles are reduced, ensuring greater reliability of the system. As a result, unnecessary consumption is reduced and user comfort is improved.
The DUAL CLIMA heat pump range has a system that reduces losses caused by the accumulation of ice in the evaporator. Before the cooling liquid passes through the distributor, it flows through the bottom of the evaporator preventing ice from forming in this area.
Air source is a clean technology that respects the environment.
It does not emit combustion gases since it does not need to burn anything to bring heat to the heating installation or domestic hot water.
Central heating, hot water and cooling functions are available.
It is a much safer system and requires less maintenance than those that need to exchange cooling gas inside the house.
The heat obtained is exchanged in the condenser, transferring it to the heat transferring fluid, which is responsible for supplying and/or domestic hot water.
EASE OF USE
MONOBLOC technology, in which the entire gas circuit is integrated into the outdoor unit, reduces the risk of cooling gas leaks, thus avoiding gas recharge operations.
In addition, by using electricity as a power source, the maintenance required in the combustion of fossil fuels is avoided, both in the combustion chamber and in the exhaust gas outlet.
Electronic control inside the home
The control board of the DUAL CLIMA air source heat pump is installed inside the home, from which you have complete control of all the components of the system, with an easy and intuitive use.
Quiet night operation mode
Night operation mode reduces fan noise levels during the night hours programmed in the system.
EASE OF INSTALLATION
With MONOBLOC technology only hydraulic connections are made, which simplifies the installation
The gas/water exchanger is incorporated in the outdoor unit, thus avoiding the necessity to manipulate the cooling circuit in the installation process. The connection between the outdoor and indoor units is hydraulic, making the installation simpler and allowing a greater distance between them than if cooling gas was used as a heat-transferring fluid.